CN
SE
Epoxy Resin Board:
1. The most common method is to clean the countertop with 70% concentrations of ethanol before and after work.
2. If it is only to remove the surface of the dirt, with a damp cloth can be used; If these dirty things are harder to wipe, it is recommended to use household cleaners, but not with abrasive detergent, also cannot be waxed.
3. Grease scratches from metal, rubber and similar objects can be wiped with a cloth filled with naphtha or solvents.
4. Regular use of paper towels or clean dishcloth dipped in crystal simple green products for cleaning, polishing, can also use bright oil for cleaning and brightness.
5. If you want to restore the original luster of the table panel, you can wipe the surface with a cloth filled with oil and dry with dry cloth.
Physical and chemical Board:
1, do not put this material for a long time in the temperature of more than 135 degrees.
2, please do not expose this material to open flame, molten metal, metal spark or just set sun, also can not be used as chopped surface.
3, the flame of the coal gas or the alcohol lamp can damage the surface of this product, so the alcohol lamp or the coal gas must put on the tripod to use.
4, the surface of physical and chemical Board recommended by warm water, ketone or mild detergent detergent, can be used to wash hands or wash dishes cleaning agent, do not use abrasive, strong acid components of the detergent to avoid damage to the surface, for stubborn stains, can be a secondary oxygen acid drop on the surface of the pollution of the physical and chemical board after the clean water.
